Get Access To 2500+ Courses For A Year For Just £49. GET NOW
Description
Cisco CCNP is a globally recognized certification for engineers who want to upgrade their skills and want to work independently for troubleshooting complex network solutions. If you want to improve your skills regarding troubleshooting complex network, the bundled course is for you. Apart from providing practical knowledge the Cisco CCNP Complete Certification – Video Training course will also prepare you for three different Cisco CCNP exams.
The course is divided into three sections: Cisco IP Switched Networks (Switch), Troubleshooting and Maintaining Cisco IP Switched Networks, and Cisco IP Routing.
In Cisco IP Switched Networks (Switch), you will learn the system of using advanced IP addressing and routing in implementing scalable and secure Cisco ISR routers connected to LANs and WANs. On the other hand, Troubleshooting and Maintaining Cisco IP Switched Networks helps you to plan and perform regular maintenance on complex enterprise routed and switched networks. You will also be introduced to the technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting.
Finally, Cisco IP Routing teaches you how to secure routing solutions to support branch offices and mobile workers.In short, the bundle video course helps you to handle complex networking solution. Â
Assessment & Certification
To achieve a formal qualification, you are required to book an official exam separately with the relevant awarding bodies. However, you will be able to order a course completion CPD Certificate by paying an additional fee.
- Hardcopy Certificate by post – £19
- Soft copy PDF via email – £10
Requirements
Our Cisco CCNP Complete Certification – Video Training is fully compatible with any kind of device. Whether you are using Windows computer, Mac, smartphones or tablets, you will get the same experience while learning. Besides that, you will be able to access the course with any kind of internet connection from anywhere at any time without any kind of limitation.
Career Path
After completing this course you will be able to build up accurate knowledge and skills with proper confidence to enrich yourself and brighten up your career in the relevant job market.
Course Curriculum
| Network Design | |||
| Network Design | FREE | 00:27:00 | |
| Collapsed Core Option | 00:30:00 | ||
| Switching Methods | 00:31:00 | ||
| CAN | |||
| CAN | 00:12:00 | ||
| Basics of VLANs | 00:19:00 | ||
| Trunking | 00:17:00 | ||
| Creating a Trunk | 00:12:00 | ||
| Voice VLANs | 00:21:00 | ||
| Configuring a Voice VLAN | 00:09:00 | ||
| VTP Versions | 00:17:00 | ||
| Examining VTP | 00:11:00 | ||
| Other DHCP Configurations | 00:15:00 | ||
| Configuring DHCP | 00:11:00 | ||
| DHCP Use | 00:11:00 | ||
| Configure Stateless DHCP | 00:20:00 | ||
| What Must Match | 00:06:00 | ||
| Configure EtherChannel | 00:05:00 | ||
| Load Balancing EtherChannel | 00:02:00 | ||
| Spanning Tree | |||
| Spanning Tree | 00:31:00 | ||
| Root Bridge (eNotes) | 00:23:00 | ||
| Verify PVST | 00:16:00 | ||
| Influencing the Root Bridge Election | 00:28:00 | ||
| STP Path Manipulation | 00:04:00 | ||
| UplinkFast | 00:28:00 | ||
| PortFast and BPDU Guard | 00:06:00 | ||
| Inter-VLAN Routing | |||
| Inter VLAN Routing | 00:08:00 | ||
| Router on a Stick | 00:19:00 | ||
| Pros and Cons of an External Router | 00:12:00 | ||
| SVI | 00:20:00 | ||
| L3 Switch Interface (eNotes) | 00:07:00 | ||
| Advanced Switch Configuration Options | |||
| Advanced Switch Configuration Options | 00:16:00 | ||
| Setting the Clock Manually | 00:02:00 | ||
| Configure NTP | 00:07:00 | ||
| Securing NTP | 00:05:00 | ||
| Overview of SNMP | 00:18:00 | ||
| Configure SNMPv3 | 00:10:00 | ||
| What is Cisco IP SLA | 00:21:00 | ||
| SLA Configuration | 00:08:00 | ||
| Configuring SLA Responder | 00:07:00 | ||
| Introducing SPAN | 00:18:00 | ||
| L3 FHRP | |||
| L3 FHRP | 00:15:00 | ||
| Configuring HSRP | 00:17:00 | ||
| What is HSRP Pre empt | 00:23:00 | ||
| Configuring Tracking | 00:05:00 | ||
| What is VRRP | 00:15:00 | ||
| Configuring VRRP | 00:08:00 | ||
| Security | |||
| Security | 00:25:00 | ||
| Port Security | 00:11:00 | ||
| Port Errorst | 00:21:00 | ||
| Storm Control | 00:02:00 | ||
| Configuring TACACSRADIUS | 00:08:00 | ||
| Limitations of Both | 00:30:00 | ||
| Planning Maintenance for Complex Networks | |||
| Planning Maintenance for Complex Networks | FREE | 00:14:00 | |
| Network Maintenance Tools, Applications, and Resources | 00:32:00 | ||
| Troubleshooting Processes for Complex Enterprise Networks | |||
| Troubleshooting Processes for Complex Enterprise Networks | 00:09:00 | ||
| Implementing Troubleshooting Procedures | 01:15:00 | ||
| Using Maintenance and Troubleshooting Tools and Applications | |||
| Using Maintenance and Troubleshooting Tools and Applications | 00:12:00 | ||
| Collecting Real-time Information Using Cisco IOS debug Commands | 00:10:00 | ||
| Gathering Information with SNMP | 00:15:00 | ||
| Maintaining and Troubleshooting Campus Switched Solutions | |||
| Maintaining and Troubleshooting Campus Switched Solutions Troubleshooting Tools and Applications | 00:12:00 | ||
| Spanning Tree Failures | 00:12:00 | ||
| Troubleshooting Multi-layer Switches | 00:43:00 | ||
| Maintaining and Troubleshooting Routing Solutions | |||
| Maintaining and Troubleshooting Routing Solutions | 00:25:00 | ||
| OSPF Review Network Areas and LSAs | 00:27:00 | ||
| OSPF to EIGRP Redistribution Troubleshooting Process | 00:32:00 | ||
| Troubleshooting Addressing Services | |||
| Troubleshooting Addressing Services | 00:24:00 | ||
| DHCP Overview Client–Server Communication | 00:23:00 | ||
| IPv6 Troubleshooting – show Commands | 00:40:00 | ||
| Troubleshooting Network Performance Issues | |||
| Troubleshooting Network Performance Issues | 00:25:00 | ||
| AutoQoS Troubleshooting Example | 00:24:00 | ||
| Spanning-Tree Issues | 00:44:00 | ||
| Troubleshooting Converged Networks | |||
| Troubleshooting Converged Networks | 00:16:00 | ||
| Section 2 Overview | 00:16:00 | ||
| Section 2 Overview | 00:16:00 | ||
| Maintaining and Troubleshooting Network Security Implementations | |||
| Maintaining and Troubleshooting Network Security Implementations | 00:13:00 | ||
| IOS SPI Example | 00:14:00 | ||
| BORW TSHOOT Example 2 Crypto Map ACL Error | 00:10:00 | ||
| Review and Preparation for Troubleshooting Complex Enterprise Network | |||
| Review and Preparation for Troubleshooting Complex Enterprise Networks | 00:09:00 | ||
| Section 2 Overview | 00:46:00 | ||
| Routing Services | |||
| Complex Enterprise Network Frameworks, Architectures, and Models | FREE | 00:15:00 | |
| Creating, Documenting, and Executing an Implementation Plan | 00:09:00 | ||
| Overview of IP Routing | 00:12:00 | ||
| RIPNG | 00:26:00 | ||
| Configuring the Enhanced Interior Gateway Routing Protocol | |||
| Understanding EIGRP Terminology and Operation | 00:14:00 | ||
| Planning EIGRP Routing Implementations | 00:03:00 | ||
| Configuring and Verifying EIGRP | 00:03:00 | ||
| Enable EIGRP Routing | 00:01:00 | ||
| Define EIGRP Networks | 00:03:00 | ||
| Define Bandwidth on Interfaces | 00:01:00 | ||
| Enable and Disable EIGRP Automatic Summarization | 00:01:00 | ||
| Passive Interface | 00:02:00 | ||
| IP Default Network | 00:03:00 | ||
| Configure a Router to Advertise a Default Route as the Gateway | 00:02:00 | ||
| Example of the IP Route Next Hop Command | 00:01:00 | ||
| Example of the IP Route Quad Zero Command | 00:01:00 | ||
| Summarization in Discontiguous Networks | 00:01:00 | ||
| Configuring and Verifying EIGRP in an Enterprise WAN | 00:03:00 | ||
| Disabling Automatic Summarization | 00:01:00 | ||
| Frame Relay Using Dynamic Mapping | 00:03:00 | ||
| EIGRP over Layer 3 MPLS VPNs | 00:02:00 | ||
| EIGRP over Layer 2 MPLS VPNs | 00:04:00 | ||
| Configuring and Verifying EIGRP Authentication | 00:04:00 | ||
| Configure Authentication Mode for EIGRP | 00:02:00 | ||
| Configure the Key Chain | 00:01:00 | ||
| Optimizing EIGRP Implementations | 00:05:00 | ||
| Enable Authentication to use the Key Chain | 00:01:00 | ||
| EIGRP | 00:21:00 | ||
| Configuring the Open Shortest Path First Protocol | |||
| Understanding OSPF Terminology and Operation | 00:20:00 | ||
| OSPF Packets | 00:11:00 | ||
| Planning OSPF Routing Implementations | 00:06:00 | ||
| Basic OSPF Verification and Configuration | 00:09:00 | ||
| Configuring Single Area OSPF | 00:02:00 | ||
| Configuring Multi Area OSPF | 00:01:00 | ||
| EIGRP over Layer 3 MPLS VPNs | 00:02:00 | ||
| OSPF Network Types | 00:11:00 | ||
| Assigning Router Priority | 00:02:00 | ||
| Override the Default Interface Cost | 00:01:00 | ||
| Configure a Key for Simple Authentication | 00:01:00 | ||
| Configure the MD5 Key-ID and Key | 00:02:00 | ||
| Verifying Simple Password Authentication | 00:01:00 | ||
| OSPF | 00:19:00 | ||
| Manipulating Routing Updates | |||
| Assessing Network Routing Performance Issues | 00:05:00 | ||
| Using Multiple Routing Protocols on a Network | 00:09:00 | ||
| Redistribution Supports All Routing Protocols | 00:01:00 | ||
| Implementing Route Redistribution | 00:07:00 | ||
| Redistribute Routes into RIP | 00:03:00 | ||
| Redistribute Routes into OSPF | 00:04:00 | ||
| Default Metric for Routing Protocols | 00:02:00 | ||
| Redistributing Routes into EIGRP | 00:05:00 | ||
| Applying Metric Values for EIGRP | 00:03:00 | ||
| Modifying the Administrative Distance for all Routing Protocols | 00:06:00 | ||
| Changing OSPF AD | 00:15:00 | ||
| Controlling Routing Update Traffic | 00:11:00 | ||
| Route Map | 00:10:00 | ||
| Using Distribute Lists and Filter Incoming Routing Updates | 00:03:00 | ||
| Defining a Filter for Outgoing Routing Commands | 00:02:00 | ||
| Distribute List In or Out and Examples | 00:06:00 | ||
| Distribute Lists to Avoid Route Feedback | 00:05:00 | ||
| Fallbacks of Distribute Lists | 00:01:00 | ||
| Using Prefix Lists | 00:02:00 | ||
| Implementing Path Control | |||
| Understanding Path Control | 00:05:00 | ||
| Similarities of ACLs and Prefix Lists | 00:01:00 | ||
| Implementing Path Control Using Offset-Lists | 00:03:00 | ||
| Configuring a Prefix List | 00:04:00 | ||
| Implementing Path Control Using Offset-Lists | 00:03:00 | ||
| Verify Offset-Lists | 00:01:00 | ||
| Implementing Path Control using IOS IP SLAs | 00:10:00 | ||
| Cisco IOS IP SLAs | 00:01:00 | ||
| IP SLAs Applications | 00:01:00 | ||
| Operations – Responders and Sources | 00:01:00 | ||
| IP SLAs Operations | 00:01:00 | ||
| Steps to Deploying IP SLAs | 00:01:00 | ||
| IP SLA – ICMP ECHO and ICMP ECHO Sub Commands | 00:04:00 | ||
| IP SLA Schedules | 00:05:00 | ||
| Define Tracking Objects to Track the State of IP SLAs Operations | 00:02:00 | ||
| Configuring Track Delay | 00:01:00 | ||
| Configure a Static Route for IP SLAs Tracking | 00:03:00 | ||
| Verify IP SLAs using Method 1 | 00:02:00 | ||
| Verify IP SLAs using Method 2 | 00:02:00 | ||
| Implement Path Control using Policy-Based Routing | 00:09:00 | ||
| Implement Path Control using Policy-Based Routing | 00:01:00 | ||
| Configure PBR | 00:01:00 | ||
| Logical PBR Operation | 00:01:00 | ||
| Route-Map Commands for PBR | 00:03:00 | ||
| Match Statements and Conditions | 00:03:00 | ||
| Match Commands Used in PBR | 00:01:00 | ||
| Specify Criteria to be Matched using Prefix Lists of ACLs | 00:01:00 | ||
| Specify Criteria to be Matched by Packet Length | 00:01:00 | ||
| Modify Matching Conditions using Set Statements | 00:01:00 | ||
| Set Conditions | 00:03:00 | ||
| Set Commands used in PBR | 00:02:00 | ||
| Specify the Next Hop IP Address for Matching Packets | 00:01:00 | ||
| Specify Interfaces Through which Packets Can be Routed | 00:01:00 | ||
| Specify a List of Default Next-Hop IP Addresses | 00:02:00 | ||
| Specify a List of Default Interfaces | 00:02:00 | ||
| Mark Packets Using the IP ToS Field | 00:02:00 | ||
| Set the 3 IP Precedence Bits in the IP Packet Header | 00:01:00 | ||
| Set IP Precedence Parameters | 00:02:00 | ||
| Identify a Route Map to Use for Policy Routing on an Interface | 00:01:00 | ||
| Various Methods to Verify PBR | 00:02:00 | ||
| Advanced Path Control Tools | 00:02:00 | ||
| Implementing a Border Gateway Protocol Solution for ISP Connectivity | |||
| BGP Terminology, Concepts, and Operation | 00:20:00 | ||
| EGP and IGP | 00:01:00 | ||
| AS | 00:02:00 | ||
| IANA | 00:01:00 | ||
| RIRs | 00:02:00 | ||
| AS Numbers | 00:03:00 | ||
| Facts about BGP | 00:03:00 | ||
| BGP Neighbors | 00:03:00 | ||
| BGP Operational Overview | 00:02:00 | ||
| BGP Use between ASs | 00:01:00 | ||
| BGP and IGPs | 00:01:00 | ||
| Connecting Enterprise Networks to Internet Service Providers | 00:02:00 | ||
| Configuring BGP | 00:12:00 | ||
| Questions for Deploying Routing and Connection | 00:02:00 | ||
| Public IP Address Space | 00:02:00 | ||
| Configure Static Routes | 00:02:00 | ||
| Configure the Default Local Preference | 00:01:00 | ||
| Define BGP as the IP Routing Protocol | 00:03:00 | ||
| Router BGP Command Parameters | 00:01:00 | ||
| Identify Peer Router to Establish a BGP Session | 00:02:00 | ||
| Create a Peer Group | 00:02:00 | ||
| Assign Neighbors as Part of the Peer Group | 00:02:00 | ||
| Disable an Existing BGP Neighbor or Peer Group Relationship | 00:02:00 | ||
| Establish the IBGP Session Using a Loopback Interface | 00:02:00 | ||
| IBGP Source IP | 00:03:00 | ||
| Increase the TTL for EBGP Connections | 00:03:00 | ||
| Configure the Router as the Next Hop for a BGP Speaking Peer | 00:02:00 | ||
| Verifying and Troubleshooting BGP | 00:01:00 | ||
| Basic BGP Path Manipulation Using Route Maps | 00:05:00 | ||
| Filtering BGP Routing Updates | 00:02:00 | ||
| Implementing Routing Facilities for Branch Offices and Mobile Workers | |||
| Planning the Branch Office Implementations | 00:15:00 | ||
| NAT | 00:09:00 | ||
| Planning for Mobile Worker Implementations | 00:03:00 | ||
| Routing Traffic to the Mobile Worker | 00:02:00 | ||
| Implementing IPv6 in the Enterprise Network | |||
| Introducing IPv6 | 00:07:00 | ||
| Configuring and Verifying IPv6 Unicast Addresses | 00:06:00 | ||
| Routing IPv6 Traffic | 00:01:00 | ||
| Configuring Static Routing | 00:04:00 | ||
| Configuring OSPFv3 | 00:07:00 | ||
| OSPFv3 | 00:22:00 | ||
| Configuring EIGRP for IPv6 | 00:03:00 | ||
| EIGRP for IPv6 | 00:18:00 | ||
| Multiprotocol BGP (MP-BGP) | 00:03:00 | ||
| Mock Exam | |||
| Final Exam | |||
| Certificate and Transcript | |||
| Order Your Certificates and Transcripts | 00:00:00 | ||
Related Courses
TAKE THIS COURSE
- US$ 456.39
- 1 year
- Level 4 - Adv. Diploma
- Course Certificate
- Number of Units225
- Number of Quizzes0
- 1 day, 9 hours Gift this course
Instructors
4 STUDENTS ENROLLED
